8 of 8 (100%) customers would recommend this product.
Product Reviews
DIY'er REVIEWER
Overall Rating:
5
/ 5
Would you recommend this product?Yes
Value:
4
/ 5
Features:
5
/ 5
Performance:
5
/ 5
Reliability:
5
/ 5
A very good product
18 Sep 2009
ByRourke,
Southport
"I have fitted this coving to all upstairs in my house although expensive to buy you save on time because it is very light and easy to fit. I would NOT use no nonsense grab adhesive but the ready mix plaster coving adhesive. Why- because no wall is ever straight and using this adhesive you can fill in the gap top and bottom as you go along including the mitre joints. you can support the coving with 30mm panel pins three to a length,when set remove them.I have painted mine with white emulsion and no mitre or straigth joint is visible,with a very good finish all round"
Share this Review:
DIY'er REVIEWER
Overall Rating:
5
/ 5
Would you recommend this product?Yes
Value:
5
/ 5
Features:
5
/ 5
Performance:
5
/ 5
Reliability:
5
/ 5
Sculptured Coving Pack of 6
12 Dec 2008
Bybluefairie,
Boston
"Brilliant coving, easy to put up and looks fabulous. Takes paint extremely well."
1 of 1 people found this review helpful.
Share this Review:
DIY'er REVIEWER
Overall Rating:
5
/ 5
Would you recommend this product?Yes
Value:
3
/ 5
Features:
5
/ 5
Performance:
5
/ 5
Reliability:
5
/ 5
coving adhesive
1 Oct 2008
Byoddball,
warwick
"us tile adhesive to put this up supported by panel pins the tile adehsive fills the gaps just wipe of access with a damp sponge works a treat"
1 of 1 people found this review helpful.
Share this Review:
TRADE REVIEWER
Overall Rating:
5
/ 5
Would you recommend this product?Yes
Value:
5
/ 5
Features:
5
/ 5
Performance:
5
/ 5
Reliability:
5
/ 5
Easy cove
16 Sep 2008
ByAnonymous,
Suffolk
"First thing, get over the price. Look else where for something similar, the costs are far higher. This not only looks good but is so easy to work with....so long as you get the angles right. Waste a length and get all the angles you need if you are doing a fair bit, its worth it in the long run. The first lot I put up with artex, as with plaster cove, messy and not needed. Measured off and pinned up with long panel pins, then went behind and stuck it up with the £1.37 no-nonsense grab adhesive. Mitred all joints then filled with grab adhesive, finished of with gyproc joint filler, then sand. Looks the dogs, save time, expense in the long run and the finish is excellent. Done my whole Victorian house with it (whos gonna know the difference)"
