"Does the job just fine. The thread can get chewed up a bit, but I guess that is why they sell replacements - I do tend to be a bit rough with tools. Would be better if it fitted my 10mm cordless chuck for the small holes, but with a bit of wet & dry and a good dose of elbow grease it did."
"A good price for a standard useful arbor. The book description could say that the drill is replaceable, but that is even better! It fits all my small Holesaws, it was off the shelf and got me out of a deep hole (sic) and allowed me to finish a job. Still being used daily. Good value."
"I wanted an arbor to use in my smaller battery drill which only has a 10mm chuck. These are stated as being 9.5mm but wouldn't fit my 10mm chuck. I have lightly ground the edges down and now it fits and suits my needs."
"Bought this with a holesaw for a one off job and although it worked, it was a bit of a struggle as the arbour wasn't concentric with the holesaw. Not sure if this was the fault of the arbour or the holesaw. The result was an untidy and slightly oversize hole. OK for the occasional job where accuracy isn't needed but not good enough for precise work or more regular use."
"Arbor does exactly what it should, no issues at all. The drill bit however appears to be made of Brie. It bent the first time I used it and had to be straightened out in a vice. Replacements are fairly cheap."
"This fits my dewalt cordless - for info the 11mm one is much larger. Like other reviewers the drill bit bent after 10 minutes, perhaps I was a bit careless in not holding the dewalt really tightly, but it did bend easily. It has a filed down section where the screw goes against, I'll buy a replacement, but also try filing down a more hardened bit."
"This is the second one I have purchased because the pilot drill on the first, which I brought several months ago, was off centre so oscillated when used and enlarged the hole. Unfortunately this one does exactly the same, so I will be taking it back. The one I have for the larger hole saws is fine, there must be something amiss in the production and quality checking of this item by the manufacturer."