"This is easy to install and there is little to go wrong. Only comment would be on the price and there is little to it but there again manufactures set the price and I couldn't find it cheaper in the time scale that I had."
"Good value kit, piece parts to cover all arrangements of fitting. The only downside was that I had to do another cut to enlarge the outlet hole. The outlet hole needed to be larger than what was stated in the instructions."
"Kit was easy to use and set up. Works well. Only downside is the screw holes for the vents should be further away. Have to be very careful not to make the wall crumble when putting in the screws near the newly bored hole."
"This is a great value tumble drier venting kit. Comes with all the bits you'll need to connect up your tumble drier down to the wall plugs and spare hose in case your tumble drier doesn't come with one. The instructions are clear and easy to follow but it's so easy to fit I didn't need them."
"I bought this kit to connect a commercial tumble dryer. Contains some very useful bits - but imagine my surprise when I was called back to replace the plastic hose - which literally had melted in 3 days' use.
The aluminium ducting in the kit saved the day - but for superior heat resistance I shall be using a cooker hood ducting kit next time!"
"Good idea, everything included but i found the vent once fixed would not close properly, I will fit another vent as mentioned in one of the other reviews. That being said it is good value for money and works."
"Bought one of these as it was by far the cheapest option out there. Easy to fit and works fine, but I'm not sure how long the self adhesive flange fixing to the rear of the dryer will last...time will tell. Would probably be a better idea to secure it with a few short self-tapping screws in addition to this. Also the flexible hose seems very weak, and I have the same reservations about this part as well. That said it works fine and is very good value for the money."
"all worked ok apart from the exterior vent,the hole centres are far too close to the 112mm hole in the wall and tend to break through.so i had to buy a bigger vent.also the flexible pipe is very short and not suitable for front fixing on the dryer"
"This product is good value for money and was easy to fit. However, I found that one of the flaps on the outside vent stuck shut. In the end, I changed it for another Screwfix vent (11066-92) which has open vanes. That allowed better airflow."