"After reading other reviews I was a bit wary of the rubber seal coming out of it's housing and when I dry fitted it on to the pan this did happen, however when I used a hair dryer to make the rubber more ply-able along with some washing up liquid it slid on no problem! Once I had wiped the washing liquid off and the rubber had cooled I was left with a nice tight seal. The offset allowed the pan to Sit firmly on the floor as the waste was a few cm higher.
Over all good product when a bit of prep is carried out! No leaks so far!"
"Simple, basic, reliable pan connector. Creates a good seal - use a bit of washing liquid to make connection to pan easier. I've fitted quite a few of these and the only time I had a problem turned out to be the faulty casting of the pan outlet, which wasn't circular, so the connector couldn't form a seal, otherwise they're totally reliable."
"I've tried a few of Floplast's various pan connectors, but won't use them any more. They are a right pain to fit onto the pan spigot (even when properly lubricated first). The rubber seal keeps coming out from under the clip-on 'securing' ring. You have to fit it to the pan first, while you can still look through the output end to check if the seal has displaced or not. I don't recomend these at all. Sorry Floplast, you can improve on this design."
"While putting this on the back of the pan the seal just came out of it. I may have been unlucky but the seal was very tight. I bought a different type and fitted without issue. Return processed easily though."