"This was frighteningly simple, undo 1 screw on the inside of the door, put the key into the lock, wiggle it a bit and pull, the whole lock then comes out, do the exact reverse to put it back together, I've had harder knots in my shoe laces than this.
Only thing to remember, make sure you measure it first. The CAM is always 10mm, 2 other measurements are required, my lock was a 35/10/45 (90mm), all I needed were those measurements taken from the front of the barrel to the CAM and the rear of the barrel to the CAM as shown on my old barrel."
2 of 2 people found this review helpful.
Share this Review:
Review 2 for Yale 6-Pin Euro Double Cylinder Lock 35-45 (90mm) Nickel-Plated