"Used this pipe in the fabrication of a Van Der Graaf generator. (Sparky thing - not the band) I bought five units to experiment with different belt lengths. When running it straightens curly hair and removes surplus eyelashes & eyebrows - the wife loves it! Couldn't have built this without screwfix....
.....Cutting a 102 mm hole in a stainless steel sphere was a bit of a pain though....."
"I'm sure that this is great ducting. In my house however it is a great wine rack (see told you I was different!). Stack these as you would hexagons. Rivet each end. Put two bottles in each with the bottle necks sticking out each end. Cheap as chips. Looks smashing. If it supports the weight of my homebrew then air ducting is a given . . . ."
"took on new house the cooker hood extraction went though the bridging cabenet above through a flexibal pipe. this keped falling off and bulging round the space the space was filled with grease, so some sugar sope and the round ducting fixed the grease"
"The pipe is fine. I needed some to link an extractor fan to existing ducting but it took 2 lengths + connector to go through 1 cupboard. That is just exasperating. Note that the image is wrong as it shows a pipe twice as long as it really is. I should add that no-one else seems to supply longer lengths. Also, the 2 pieces must have come from different batches as the colour (white) was noticeably different but then I should have looked at them more carefully when buying.
Come on Screwfix, pressure your suppliers to supply more useful lengths."
This size of pipe allows me to use my 107mm coring bit for tumble dryer vent kits. The Manrose kit comes with the foil type sleeve which needs a 112mm coring bit. I substitute the foil with this plastic pipe which saves me going and buying a larger bit.
This pipe is also a neat fit inside 4 inch soil pipe if extra length is needed."