"I got this to scrape old ceramic tile adhesive and thought it might not be up to the job. But it works very well. Get the angle right to cut under the adhesive and it all comes away easily. Initially I was dubious about the angled cutting edge, but that is also a good feature allowing different angles of attack.
"I was doubtful about if it would be strong enough but I did not need to worry. I purchased it originally to scrap lose/flaky paint off the wall which it handled with ease. I have since used it to remove tile adhesive after removing old wall tiles and to scrap off plaster on surfaces where it shouldn't have been after the plasterer had made a mess!! I would recommend buying replacement blades at the same time as the sharper the blade the easier the scraping but the blades do last a good amount of time, obviously depending on what you use them for"
"Scraper does the job better than any standard scraper. I recently bought another as I'd ruined the retaining screw on an old one and was pleasantly surprised that they are now supplying a newer upgraded model with two retaining screws and a better handle, well pleased. So the current picture is out of date."
"Bought to remove a degraded PVA coating discovered under some retro wallpaper. Bladed edge naturally gets much closer to the wall than a standard striping blade, removing coating much faster and with less damage to the wall.
Handle is comfortable, blade easy to replace. Would recommend for such jobs. I considered the wider blade option but finding the 4" up to the job and possibly coping better than the wider blade might with the slight undulation of the wall itself."
"This item was purchased to tackle some wallpaper that had had many coats of emulsion and it performed brilliantly. You have to be slightly careful as the blades are very sharp and will gouge the plaster if too much pressure is applied, but once a little time has been spent using it, it becomes less of a problem The only problem I have had has been that 1 of the screws holding the blade has partially stripped the thread, due to the soft material used for the component. (replaceable nuts would be better)."
"The picture only shows one screw but it actually has three and this proves more sturdy. Very good for the price. Got to be careful as it will not only strip the paper but if you get the wrong angle will take the plaster as well."