"Used this to level off poured concrete hearth for fireplace I made after leaving to set for 3 days.Leveled out tamping and float marks without any issue to leave a nice sanded level finish, lots of dust on initial pass over surface , less so on subsequent passes. Used Makita 4.5 inch grinder with backing plate for disc, keep grinder moving or it will eat into surface, leaves an excellent finish. 3 passes over 3m square hearth and still has plenty left in disc."
"With large areas of screed that needed a thorough clean before sticking down engineered oak flooring I needed sturdy discs that would handle at least 20 sq mt per disc and these have handled the task well."
"Needed to remove glaze from some block paving. This did the job very nicely. I had been to a ire shop an their recommended tool did not remove anything. The Nylon backing plate was not as flexible as I had expected."
"Having read the reviews on your web site i thought i would give these discs a go,as everything els i have tried had failed, thses were very good did everything i wanted to do and more,still got life left in disc to do more if needed/"
"Had some very badly contaminated facing bricks after removal of rendering. I used 2 of these to completely remove all traces of old paint and render from some 500 bricks with ease. Bricks look like new and the second disc still has some life in it. Easy to use and control in order to only remove the contaminates. A really good buy."
"I bought this along with a backing pad to clean a wall built using reclaimed Cafferata bricks which was covered with a fair bit of mortar (it was my first time). Having read the previous reviews and the product description I hoped this disc would remove the majority of mess. Testing on spare bricks, the disc removed the detritus but also marked the face (the pressure used was light) - I would not recommend this product for cleaning the facing side of bricks."