"Without doubt the best mitre adhesive available , I have used pretty much all other brands available and go through 2-3 packs a week so take my word for it as a joiner and joinery subcontractor with 10 lads who I buy this product for that you won't go wrong with unika mitre adhesive"
"Will stick many different materials fast setting just hold in place for literally a few seconds and very strong bond. Waiting for a superglue or gorilla type glue to cure isn't always ideal but this will achieve bond in 10 seconds. NO mess."
"Incredible Sticking Power in Seconds! Whilst installing a kitchen I used this product to stick 45 degree cornicing sections together before installing them over and under cabinets. To get a perfect finish you have to be very careful not to apply too much adhesive (that could run or squeeze out of joins) or allow the spray-on activator to splatter anywhere other than where you want it. You also have to get the two pieces of material together in the correct position very quickly and you only get about 3 seconds to make adjustments once the two sides have come into contact. But get all that right and the finish is immaculate and the bond is as strong or stronger than the materials being bonded after just a matter of seconds! Literally the best adhesive I've ever used. Can't recommend highly enough."
"A brilliant product that's good value for money and sticks so many things. I keep a pack in my van as it always comes in handy. Only 15 seconds and the item is stuck so mind your fingers cos it will bond those too."
"I bought this to so the mitres on my kitchen. Had loads left over. When my dentures dropped and hit the deck they broke in two. Used this out of desperation to fix them. This was about 8 months ago and they are still rock solid. What more can I say that will tell you how good this stuff is."
"This is a thicker glue (high viscosity) so does not run all over the place. With the spray accelerator it is a bargin. In fact buy the 3 pack they do. Pity its not on the same page with the other mitre glues, (its with the kitchen bits)."
"Used the product here for sticking mitres on window boards, which have a plastic wood finish and foam core. The glue doesn't melt the core and has the viscosity to stop it running everywhere while handling the workpiece. Bond strength is excellent and handling is possible almost immediately.
Only criticism is the spray activator. You need to mask the finished surface to stop discolouration. The version with the activator pen is quicker and more useable"