10mm x 25m. Table W annealed. PVC plastic coating provides protection from aggressive substances, accidental damage and abrasion. Withstands water temperatures up to 95ºC and reduces heat loss and noise levels. For heating, plumbing and oil. Tested to EN 1057.
Average Customer Rating:
(3 Reviews) 3
Rating Snapshot(3 reviews)
3 of 3(100%)reviewers would recommend this product.
Customer Reviews for PVC Coated Copper Pipe White 10mm x 25m
Review 1 for PVC Coated Copper Pipe White 10mm x 25m
"This product is fantastic, while it may seeem quite expensive, it is a joy to use. It is rigid enough to feed in long runs under floors, but very flexible to pass around tight corners or through holes. Time savings easily make up for tthe high price and the quality of finish is excellent."
2 of 2 people found this review helpful.
Share this Review:
Review 3 for PVC Coated Copper Pipe White 10mm x 25m
"Copper prices have been lower!!! White plastic coating looks good without painting where exposed but clean ink markings off before you clip pipe to wall and do not remove too much plastic close to fittings. If you have space for chunkey plastic push-fit fitings with rubber O-rings they work well but take care with compression fittings as too much handling of pipe causes pipe to relax and olive to get loose after initial tightening. Don't forget to try tightening compression fittings immediately before flooding pipework then check thoroughly for leaks. (or Leeks when in Wales!) Soldered fittings would be best if you can get hold of them and removing more of the plastic coating doesn't matter."