"I'd always used a bit of 3in1 oil or WD 40 when drilling metal, which kind of worked, but then I had a load of issues with drilling stainless steel. So I tried this stuff and its amazing the difference it makes. drills cut straight through cleanly. I should have started using this ages ago, would have saved me a fortune in knackered drill bits."
"I drilled a hole in a Transit's roof with a step bit (Erbauer Spiral Flute Step Drill Bit 4-20 mm: 8528D) Then I drilled a second hole using the Cutting Paste. Wow! Second hole was faster and neater and did not need a file to de-burr it. The tube will last years and will save me a fortune on new bits."
"Excelent product. After spoiling several drill bits drilling some 12mm iron bar, getting through a hss bit for every couple of holes without Exact cutting paste. With one 6 mm titanium bit from Screwfix and the cutting paste, drilled 16 ,12 mm bars with one bit which was still going strong at the end.
That is nearly 200mm through rolled iron bar with one bit and the bit was still sharp and showed no heat discolouration.