"Nice solid knob made of thick steel. I would strongly suggest that you take a piece of 100x100mm mdf, sit the knob on top and drill all the holes in the mdf, then use that as a drill template for the doors. As one reviewer stated, the knob is in the way of the screw holes and the screws are small, so unless you happen to have a really long 3mm drill you will need the drilling template. All in all a quality product at a low price."
"Purchased these as a short term refresh for existing doors. Handles are good quality for the money but sadly the supplied screws are very poor. Poorly finished off-centre Philips heads meant a struggle to get a positive grip when tightening. Screw holes being blocked by the handle as previously mentioned by another reviewer does not help. Not able to comment on reliability as only just fitted."
"The knobs are solidly made however this does not apply to the screws supplied. Had all of the problems with installation as the other reviewers but mine were so stiff that it actually makes them really hard to turn. Wd40 didn't do the trick unfortunately so considering taking them back"
"My dad had to fit 9 of these, there was much swearing and cursing. They were not easy to fit as the holes are hard to access as the knob is in the way, and when fitted they don't have an internal spring so don't ping back the locks... Cheap and cheerful. Look nice but not really fit for purpose..."
"Product looks great now, but was a nightmare to fit. The knob is as wide as the base making it very difficult to screw the screws into the door and additionally not helped by heads that disintegrate easily. By using a long thin screwdriver from an angle I eventually got an acceptable result - but far from perfect."
"I bought 8 pairs of this item recently. 11 out of 16 knobs had to be reengineered. They were all slack and rattled against the plate ( there is no return mechanism on this item!). I managed to remove the circlip, from all of them, by levering under with a screwdriver - that's how slack they were! The knobs look fine but they are an inferior engineered product compared to the brass knobs (also from Screwfix) they replaced."
"I bought four of these but have only fitted two. Apart from the difficulty getting the screws in; the knobs I received were so stiff they don't allow the catch to work. Having tried everything to make the knobs turn freely I've now given up and are replacing them with something better."
"Happy with the handles although out of 6 pairs most were loose and rattled about. The screws provided were SHOCKING! Machined so shallow i couldn't get any screwdriver to turn them...that plus the angle I had to screw then in basically just chewed up the heads... I know that times are hard but you definitely get what you pay for...and these aren't worth the money!!!"