"replaced a single sink with 1& 1/2 bowl. used this to keep under the sink tidy, but no U bend provided. Luckily I could salvage old Ubend. On reflection, might of been tidier to use some Elbows, and join them behind the unit in the service cavity *would of provided more under sink space, but may of worked out costlier :)
All in all, the job was done, and was pretty cheap. Comes with a washer connection - which is blanked off (not required in my kitchen)"
"Be careful as all these sink traps come in different connection types, I had to mix and match a few parts from the old setup in order to get this to fit and had nothing to do with the sink waste part of it. If you don't have big bunch of 'waste trap' spares I'd definitely buy a different brand too so that at least one will fit."
"Agree with other reviewers - the picture online does not represent what comes in the packet - the half bowl pipe IS telescopic - the other IS NOT nor is there a decline on the pipe from the main bowl. Strange Screwfix have updated this in their new printed catalogue but not online. I had to buy another piece for it to work but it all fits together easily and no leaks!"
"Agree with earlier review, the half bowl height must be higher than the main bowl as only half bowl height can be adjusted. Thought the pictures were confusing as shows both bowls having height adjustment on one shot but this is not the case. Did the job for me although the final wall outlet height also had to be adjusted with 2 extra 90 bends (ie built-in height adjustment on both bowls would have been more desirable)."
"This product is sold as fitting a 1 1/2 bowl sink, however it does not fit a 1 1/2 bowl sink that has near equal depth to both bowls it will only fit a sink where the 1/2 bowl is much shallower than the main bowl. The sink I was installing was a Blanco stainless steel 1 1/2 bowl sink"