"I bought 2 of these to remove rust and paint from 2 metal garden chairs. I was very impressed with the performance, removed the rust and paint with no damage to the base metal. 2 chairs complete with just 1 brush and it still has plenty of wire left. As others have said, you need to wear good eye protection as the material being removed and the odd wire come off at high speed. Would recommend this product."
"I use these a lot for removing years and years of paint from metal work when repairing and renovation railings or gates. They last a long time, removing everything quickly without damaging the original metal or intricate detailing underneath. You can pay more for other brands but they won't do a better job or last any longer. Save your pennies and buy these"
"An excellent wire brush that easily cleared the rust and old bitumen from a corrigated iron roof. The brush has a good working life, if excess pressure is applied to the brush this significantly shortens its life. Remember to wear safety glasses and preferably have your arms covered."
"This brush wil leasily remove thick layers of paint and rust BUT you must wear eye protection, gloves and ear defenders. If you are working near glass then cover it up as the small pieces of wire come off at incredible speeds. It is just as good as some BOSCH brushes I have used but is considerably cheaper."
"Works well and is durable but being bevelled it protrudes past my grinder guard. I use these to remove mortar between paving slabs and the bevel results in major sand blasting of the body. Am-Tech offer a flush version which does not have this issue"
"Like all Titan products, this is not really trade/professional quality BUT that having been said, it lasted out the job it was intended for and so represented good value for money. If it's a wire-brush you're after for the occasional stock removal, then this does the job"
"This item certainly does the trick. But it is essential to wear a face GUARD as pieces of wire can fly off, and would cause injury. Don't bother with the equivalent cup design brush. It is too heavy and the torque needed to overcome the inertia to get up to speed can seriously damage the angle-grinder gear train. Best thing for removing layers of paint on metal window shutters, and beats trying to burn off the paint. Need to work outside and wear an effective face mask too."
"Used this on an exterior fire escape tread plate staircase. Needed to paint a 1'" band on front of step to highlight treads in low light but had to clean them off first. Used this wire wheel attachment on my grinder, did the job but very worn after 14 steps and watch out for the flying wires it releases, these do hurt if they hit you. Not a bad product for the money but should be treated as disposable."