"Excellent glue, but don't get it on your skin, it doesn't wash off. This is a moisture activated glue so apply a thin smear to one face and wipe over the other with a damp cloth. It expands and foams so you must clamp or pin the joint. Excess can be removed with a knife or chisel after setting. It sticks almost anything, so beware. Screwfix need to watch packaging, I had one arrive broken, lucky it's in a bag as well as a bottle or it would have glued all the parcels to the parcel force van floor."
"Excellent glue that can be used for all woods and many more situations. Waterproof so a great choice for outdoor applications. Just be sure to wait for excess to cure and go hard before trying to remove. Once cured, the excess can easily be taken off with a sharp knife or chisel. Don't get it on your hands as it takes about three days to wear off (will not wash off!)."
"Have used many types of PU glue before and thought I would try this one.
It does glue and foam much like the rest of the market. The overall glue strength is not as good as the other products and as Sparklet says the joints can be knocked apart with a sharp hammer blow. Normally the wood will splinter before a PU joint gives up.
It does however, stick to the skin like all the others :-("
"Very disappointed with this adhesive, the ELCH Pro PU that this seems to have replaced was a far superior product, with a longer working time and greater strength.
This might be OK for small workpieces where it can be applied and clamped quickly, but it's much too fast for a job of any size, and the adhesive loses much of it's strength once it has started to foam.