"having searched all the so called big boy suppliers for this replacement thankfuly remembered Screwfix - they had the product I needed in stock and at half the price of elsewhere. fits like a dream and so much better than the original it replaced"
"Although this does not come with an overflow blank it was no problem as i used the old one, and the picture does show that thier is not one supplied. Goods came on the day expected and as a DIY person i fitted it in less than 20 minutes so i am very pleased with the product and the delivery, spot on."
"Bought to replace an old leaking waste on a kitchen sink. Went in very easily and is of good quality. Only complaint is that this doesn't include a blanking plug for the overflow, and I wasn't able to find one at the local builders supply either (odd size? I measure it about 22mm inner diameter). Ended up getting some 3mm rubber sheet and cutting to size, bit of a faff but works fine. Would recommend despite this though."
"I recently purchased a 'large' sink from a well known Swedish store - the plumbing in kit provided - apart from the 'chromed' plastic outlet and pipe - should have been left in the bin outside the store - if I wanted an elephant's trunk I would have gone to Africa :-) This strainer waste 74806 together with a 40mm telescopic 'p' trap 21296 made fitting the sink easy and should be what 'you know who' provide with the sink in the first place - if they sell products in the UK they should be easily compatible! Anyway - good product/s from Screwfix and a solution to the Swedish problem................"
"This pairs with Basket Strainer (97562), although this isn’t immediately obvious from the current photos. The plastic bowl is slightly different (overflow connection aside, obviously) and is a couple of mm deeper, but all the other bits are identical. For most double bowl sinks you’ll probably want one of each. Quality is only adequate, but then the price is reasonable - you pays your money, etc. The large stainless steel central screw threads into plastic - do not over tighten! (use a small coin, not a big screwdriver...)"
"Product overall is good, but be aware that the size of the overflow is smaller than many overflow fittings. I managed to get it to fit by finding a nut from a different waste. I cannot remember the measurements now (and I'm not taking it apart again). It would be good if the specification of the product included the measurement of the overflow connector."
"This product comes without the overflow fitting, and to be fair says so in the description- the problem is when your original is not the same size! I could not find the required part separately in the Screwfix catalogue so was forced to buy a different sink waste kit just for this one small part. The stem of the strainer is also poorly made so it gets jammed in the sink. In future I will spend more for a more complete and better quality kit."