"Unbelievable, I've been and done all the little jobs that have been bugging me for a longtime. The accuracy along with the robust chassis make this a really neat piece of kit, my workshop is not a vast open space like some I've seen, (and are quite envious of) I am joking of course! Heres to hoping it'll give me many years of service like all of my 'Screwfix' purchases have done for me in the past, well done all you Guys & Ladies @ 'Screwfix"
"Really good tool. did all it was asked for -only blemish was that the rule guides at each end were out. as much as 15mm, one had not been glued down in correct place and took me a while to suss it it."
"I had a large number of fairly long 45 degree edge mitres to cut in 12mm thick plywood and was struggling to do this with my jig-saw so decided on the Titan table saw. Excellent purchase and is doing the job with ease"
"This table saw is spot-on for the price. Bought it to rip some lengths of timber for a small shelving job in the house and couldn't be happier. Stayed true to the line and came ready to plug in straight out of the box. As a small project/DIY saw you can't do better for the money :D
"I have bought loads in the past from Screw Fix, and i dont have a bad word to say about it. The delivery is quick and reliable and the items are always in perfect working order. Screw Fix is the way forward !!!!!!!"
"You can't expect this little saw to match machines at four plus times the price,but it has a pretty good go. As long as you are realistic with the tasks you choose to perform with it,then it's fine. Mostly it's been used to rip down 18mm ply,which it handles just fine. the toughest gear it's been through is 30mm ash. It's a case as it is with all power tools, let it fined it's own pace and you'll get there okay. Previous reviews of this saw had mentioned problems with the fence moving.True,it's not the best,but the one fitted to my machine had no real issues as long as you counteracted the twist of the nuts buy holding onto the fence. The guard could be better as it does restrict your view of any lines you might be following,but then that's what the fence is there for. Can't give a true opinion on reliability as it's only been used for around 2 hours running time,but nothing has given any concern. Overall a decent machine for the money."
"As long as you appreciate this particular product's limitations, and that you are satisfied that the work you plan to undertake is within its capabilities then this is a very good value for money item of work equipment. One ought always try to select the right tool for the job in hand, of course, rather than try and fit the tool to the job. That being said, this is - properly set up and in experienced hands - a remarkably good table saw. It is accurate, and virtually vice free. Wood waste can build up and may cause potential problems if ordinary housekeeping isn't attended to. Otherwise, and in all respects, it is a very handy piece of work equipment."
"ONCE I HAD CHECKED AND ADJUSTED THE MACHINE I WENT ON TO CUT 1" THICK OAK, NO PROBLEMS, CUT SQUARE, MOTOR SHOWED NO STRAIN. I WILL ONLY USE FOR LIGHT WORK AND MODEL MAKING AND THIS SEEMS JUST RIGHT FOR MY PURPOSE."
"Always toyed with the idea of getting a table saw and at that price, I had to give it a go. I haven't been disappointed; managed to rip loads of boards for various DIY projects, effortless. A couple of things to be aware of: I found that on my saw, the fence screws at either end didn't hold the guide very firmly and you need to keep an eye on them. Also, I merely knocked the blade protection hood which bent the guide to the one side preventing the boards from sliding through. It was easily bent back in place though and I'm more careful with it. Altogether, a great buy and a brilliant tool for DIY jobs!"
"I bought this machine with no great expectations. However it is a real fighter. It has completed all challenges delt to it with relative ease. The real beauty of it is the size, it dosent take up half the back of my van and is light as a feather. Good value for money."