Heavy duty water pump. Submersible. Adjustable water inlet size enables pumping of water with particles from 5-30mm. Float switch turns pump on and off when water level changes. RCD fitted for safety. Suitable for domestic or industrial applications. Not suitable for continuous use in fish ponds.
Average Customer Rating:
(2 Reviews) 2
Rating Snapshot(2 reviews)
1 of 2(50%)reviewers would recommend this product.
Customer Reviews for Titan LKS-550PD-1 550W Automatic Dirty & Clean Water Pump
Review 1 for Titan LKS-550PD-1 550W Automatic Dirty & Clean Water Pump
"I have been building a Vocational Institute in Ugandan and needed to be able to Harvest the rain water from the roof and lift it to a header tank for the flushed toilets. This pump was installed and after a little experimatation with hoses ( flexi hose did not work) the pump lifted 1,000lt in no time."
Share this Review:
Review 2 for Titan LKS-550PD-1 550W Automatic Dirty & Clean Water Pump
"I bought this to pump out the water in my cellar which for only the 2nd time in 20 years has got water in it.
Problem is that the pump will not pump effectively unless there is at least an inch of water depth which makes it practically useless for me. Even in a bit more depth it struggled to get the water out through an reinforced hose pipe.
This is even though it says it's a clean water pump as well as dirty water.
Also, you have to hold the float switch or balance it carefully unless there's a foot of water.
My previous pump was a "little giant" brand and it managed to pump the cellar almost dry,