"I tried a test sample because I was passing the joined pipes through a narrow roof space with no way of retrieving them if they came apart. Followed the application instructions exactly and there was no way the test pieces were coming apart after 30 minutes of drying time so 24 hours would be as good as it gets. Highly recommend."
"an excellent product, rapid set, on PVC, i have not tried this on other materials but believe it to work well. But be aware make sure that there is no residue around the neck of the container and applicator brush. Or or will be unable to open the container next use. another trip to Screwfix otherwise"
Glued together some piping for an extractor fan. Roughed the edges up and everything but the glue did almost nothing. I used a ton of duct tape to secure the joins since i didnt trust the glue on its own.
In the end i broke out the old poly cement from my model making days which did the job properly.
"I made some guttering by cutting 2 PVC pipes in half along its length thinking this stuff would glue the overlapping ends together.WRONG. I used GORILLA GLUE eventually,although it expands like expanding foam it really grips anything.Messy though. This Pipe Weld stuff might only work with a pipe pushed into a smaller diameter one for a permanent join and thats it."