"Over the years & whilst constructing our extension I have found these to consistently be the best make of screws. Design means no need to pre-drill & rarely any splitting of the timber. They will also withstand multiple removals and re-use without any fear of the head being "chewed-up" by the screwdriver bit. Generally slightly more expensive than some other makes but well worth it in the long run!! I won't choose any others now!"
"Bought these to attach drawer runners to veneered MDF and they work a treat. Screw in easily and actually pull tight whereas normal wood screws don't seem to go tight in MDF, just keep going round. Would recommend based on this."
"Easy start reliable screws that can used for stud work and general construction with confidence no splitting and close to edge fixing, have used for all jobs where I need to trust a secure fix and offer reasonable resistance to breaking with side impact. I would highly recommend to all"
"I have tried many makes of screw,but there is no doubt in my mind that Spax make one of the best. They are passivated, strong and easy to use and most of all reliable. I suppose I am lucky to have a Screwfix depot nearby, but this does not defer from the fact that they too are reliable, fair and trustworthy . The prices are also very fair. Whilst they may not be quite as cheap as Ebay, you know what you are getting and no funny business, like getting lost in the post or trying for a refund which might never come. Thanks Screwfix.!!"
"I discovered SPAX screws about 2 years ago and it was an eye opener. You would think a screw is a screws is a screw but no. They immediately grip into wood and are easy to screw in leaving a flush finish. They're also plated so will last a while before starting to rust. Once I started using SPAX I didn't want to use anything else."
"These are really good wood screws - whatever the job they are designed to cut as go into the wood making them easier to work with and providing a great finish on quick jobs or more detailed formal work."
"I used hundreds of these screws on my barn conversion and not one was found to be faulty, it's a good idea to put in a small pilot drill hole and this way it helps to maintain your drill battery life/time - fantastic product!"
"After years of trying other screws, I now only buy Spax. They screw directly in to soft blocks and mortar, no need for raw plugs, and they do not come out too easily, unlike nails! They never break, or jam whilst screwing in. You’ve tried the rest now use the best, save your time and tools!"
"I tried the Spax screws last year and to be honest I find it hard to go back to any other type. The quality of each screw is second to none. No more shearing off heads with the impact driver! Only downside is cost..if only they could be cheaper..but, you get what you pay for."
"Bought a box of these to fix sole plates of stud wall to the floor and they are just great! However, I thought I'd be gentle to the wood and drilled pilot holes for the screws which was a big mistake. Even though the pilot holes were tight, the sole plate moved when I kicked it due to the screw being 'loose' in the pilot hole. Problem was solved by simply following the instructions and drilling straight through the sole plate and into the floor, relying on the screw's technology to self-pilot, self-countersink and to not split the wood, all of which they do very well."