15kg. Ready-mixed, non-slip wall tile adhesive for installing most types of ceramic tiles onto gypsum plaster, plasterboard, and fully cured concrete walls. Ideal for domestic kitchens, bathrooms and showers. Covers up to 6m².
Average Customer Rating:
(14 Reviews) 14
Rating Snapshot(14 reviews)
11 of 14(79%)reviewers would recommend this product.
"Looked around at all the usual DIY stores and found this to be the cheapest option for ready mixed adhesive in a large quantity. Works as it should, quite thick and has a reasonable curing time to play around with if needed, needs at least 24 hours to go off in my case though (I was leaving it 48 just to be sure). Would recommend and buy again"
"Great value and held and set in good time , and the odd tile I had to take off a couple of days later was very well stuck but also cleaned up very easily . . . . . not that I cocked up and had to take a couple off you understand."
"You get confidence as soon as you start to spread this stuff. Great grab and pull from the onset. Also if you are using beige porceline or similar colour tile then it's colour does not show through a jasmine grout too much - another bonus. Knocks UNIBOND into the weeds!!"
"A good adhesive with a excellent grab. On opening the adhesive appeared quite firm, a good mix makes it more plyable. I achieved about 50-60% of the quoted coverage (quoted coverage assumes an overall 60% tile coverage). I also 'buttered' the tiles before appyling to ensure maximum bond, takes only a few seconds. I have applied to both plasterboard and aquaboard. I had to remove a tile 10 days after fixing, the cement had firmly bonded to the tile and the wall (removed part of the plasterboard backing paper surface in the process). Where the backing paper was removed, showed slight sign of adhesive moisture, however this was November with only passive heating from ajoing room. On whole, good value."
"Slightly chalky texture, dries quickly initially, but takes a while to go off completely and set. If you make a mistake, it's easy to remove tile and adhesive the next day, and refix. Overall it does what says on the tin (or should that be tub?)"
"Used this in a shower room. 18 hours after using the adhesive was still soft (on plasterboard). I need to get the job completed so removed and cleaned tiles and will refix using my usual stuff - tile one day/grout the next. Might be ok if you`ve plenty of time to hang about waiting for it to set but no good for me...."