"Strangely the catalogue does not list what screws you get in this selection pack. So here goes:- 3.0 x 16mm (150) ___ 3.0 x 20mm (200) 3.5 x 20mm (100) ___ 4.0 x 25mm ( 80) 4.0 x 35mm ( 80) ____ 4.0 x 40mm ( 55) 4.0 x 45mm ( 30) ____ 4.0 x 50mm ( 15) 5.0 x 60mm ( 15) ____ 5.0 x 70mm ( 15)
So you can see you get a good number of some very small screws 3.0x16mm & 3.0x20mm & 3.5x20mm which you can't buy in single size packs from Screwfix. I wonder why Screwfix don't sell these small sizes in single size packs, and maybe Screwfix can answer this question ??
Then there are a good number of the slightly larger screws, and it finishes off with just a small number (15) of each the bigger size ranges.
Guessing the value of the three small ranges that you can't buy in single size packs the selection box is priced pro rata - no bulk savings, but you do get the storage box.
The plus points are you don't have to invest too much to get a range of stainless screws and its the only way to get those three very small sizes and you get hundreds of them."
"an excellent service provided by Screwfix and the product has surpassed all my expectations for the purpose they have been used for. Will definately use other products in the future. The speed with which the product was sent was also of the best!"
"You have to work out what you want these screws to do! Yes I agree the stainless steel is soft, it is easy to destroy the head if the driver is not square and they can shear but once in place THEY DO NOT CORRODE!! We have become so used to just pushing a screw into wood without predrilling so either drill a clearance hole or push a Turbogold screw of the same size into the wood first to cut the thread. I have used these screws for fencing and gates for years and would use no other!"
"These Turboultra screws are simply the best I have ever used, They drive in most timber with ease and the single thread gives a high pullout, I will not use any other screws in the making of my garden furniture. The pro-case system offers good value for money, and supplies a good range of useable sizes."
"These screws are OK the smaller sizes sheer off at the head with hardly any force at all. You need to pilot and countersink before screwing them into hardwood. The larger size Turbo Ultra are fine and can be put into softwood with an impact driver!"
"Very good if you want corrosion-free screws for lightweight tasks - the stainless steel is soft and easily damaged. Pilot holes are essential in anything but soft wood. Countersinking ability is very poor (soft head) and it is easy to shear the head. For general use the turbo screws are a better and cheaper bet."
"Good exterior screws for corrosion resistance, but they're soft and have a tendency to bend if not piloted. As for self-countersinking . . . the heads sheer-off like clockwork at the mid-high torque settings required for self-countersinking. Save yourself plenty of aggro and countersink first!
"I've used the gold and turbo-gold screws before with no problems. In comparison these screws are soft! It may just be to properties of stainless steel? i don't know... but the heads are very easily rounded and I've snapped several screws (5%) whilst screwing into OSB. Very frustrating!"
"I thought i would buy a small selection box just to try, good job i did as i wasn't that impressed. The biggest fault being that the heads of the screw round off very easily sometimes leaving half a screw in with no way to turn it other than pliers. Whether the bigger selection boxes are of the same quality, I don't know, but one thing is certain, I will not be buying them again!!"